Design House Cambridge 2-Way Latch Entry Door Knob in Polished Brass
The Design House 753285 Cambridge 2-Way Latch Entry Door Knob is finished in polished brass and designed for left or right hand doors. The flat ball handle fits comfortably in your hand and the brass finish matches your homefoots decor. This knob fits the two most common backsets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. With privacy in mind, this product accepts a key on one side of the lock but is operated by a turn-button knob on the other side. Entry knobs are often used on front doors and back doors. Use this knob on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate and 5-pin security. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. This product is ANSI Grade-3 certified, which means this knob is rated for residential security. Designed and manufactured by Design House, the trusted source for quality lighting, hardware, plumbing, kitchen, and bath products for every taste and budget.
Finished in polished brass finish and Designed for left or right hand doors
Fits 2-3/4-inch and 2-3/8-inch backsets; Fits 1-3/8-inch and 1-3/4-inch thick doors
Entry Lock; operated by a key on the exterior and is by a turn-button knob on the interior.
We Also Recommend
Marmon Home Improvement 50 ft. 10/2 Orange Solid CerroMax SLiPWire Copper NM-B Wire
Marmon Home Improvement 250 ft. 10/3 Gray Solid CerroMax UF-B Cable with Ground Wire 138-1863-G
Marmon Home Improvement 500 ft. 1/0 Gauge Black Stranded Copper THHN Wire
Marmon Home Improvement 100 ft. 10/3 Orange Solid CerroMax SLiPWire CU NM-B W/G Wire 600-Volt