Crushproof Tubing SIMPLE DRAIN 1.25 in. Rubber Threaded P-Trap Bathroom Single Sink Drain Kit, White (1.25" x 30", White)

Crushproof Tubing

  • $20.49
    Unit price per 



What's in the kit:
30” flexible hose
P-trap loop with depth tab
Threaded adapter
Easy tighten hose clamp
Only tool required is a pair of scissors
Simple Drain fits both 1.5” and 1.25” tailpipe sizes

Measure, fit and install:
Push hose over tailpipe then roughly make P-trap shape
Connect trap loop and use depth gauge to properly size the trap
Add 3 ribs from measurement in case recutting is required
With a pair of sharp scissors trim in the valley of hose
Connect trimmed hose to waste line adapter
Hose fits snugly be sure to pop into place if needed, should rotate easy
Thread adapter onto waste line by hand until tight
Slide clamp and hose over tailpipe than tighten
Connect trap loop to form P-trap and measure trap depth with tab so hose is tight to its edges
(see diagram below)
Adjust the trap loop as needed to form the perfect P-trap
Trap must follow edge of depth tab with loop level to the bottom of waste line
Run water, check for leaks, and adjust as needed

We Also Recommend